manuals/manuals_Support_Center_Maxx_Megatouch_20MAXX_20Jade_20Edition_20Upgrade

Table of Contents

WARNING:

If your game is connected to TournaMAXX™ or TournaCHAMP™, you should

check the capacity of the hard drive before installing this upgrade. If your game has a 3.2

GB hard drive, and you wish to connect to TournaMAXX™ or TournaCHAMP™, we

strongly recommend that you upgrade the hard drive in your game. Contact your distributor

to obtain a larger capacity hard drive (minimum capacity of 6.5 GB).

To determine hard drive capacity:

Ruby/Sapphire software:

Press the SETUP button inside the game. Touch the “Diagnostics”

icon on the Main Menu Screen. Then, touch the “System Info” icon on the Diagnotics

Screen. Following “Hard Drive:” will be the manufacturer and the capacity in parentheses.

The capacity is documented in MB, divide by 1000 to get the capacity in GB.

Emerald software or earlier:

Turn on the game. Look for the hard drive capacity during

the boot-up sequence. It should be listed in the box on the second screen that appears

after “Pri Master Disk”. The capacity is documented in MB, divide by 1000 to get the

capacity in GB.

If you cannot determine the hard drive capacity of earlier games, install the upgrade and

then follow the instructions for determining the capacity for Ruby/Sapphire software.

Memory Installation ................................................................. p. 1-5

Software Installation ............................................................... p. 6-8

Connecting a CD-ROM Drive ................................................ p. 6

Program Installation ............................................................. p. 6-7

Security Key Installation ...................................................... p. 7

Adhering the Side Decals ....................................................... p. 9

Software Installation Troubleshooting ................................... p. 10

Software License Agreements ................................................ p. 11-16

English ................................................................................ p. 11-12

French ................................................................................ p. 13-14

German ............................................................................... p. 15-16

Megatouch MAXX Jade

™

Edition

1 MEGATOUCH MAXX JADE™ EDITION PM0466-02

CONTENTS:

QTY

PART NUMBER

DESCRIPTION

EC0056-03

64M MEMORY DIMM

PA0070-01

JADE EDITION CD #1

PA0070-02

JADE EDITION CD #2

PA0070-03

JADE EDITION CD #3

SA3079-XX or
SA3080-XX

JADE SECURITY KEY or
CHAMPIONSHIP SECURITY KEY

IMPORTANT: If you have a Telco motherboard, you must exchange the memory in
this kit with SIMMs from your distributor. Before beginning installation, make
sure that you have the correct memory for your game. The memory exchange
for Telco boards is free as long as the memory provided in this kit has not been
opened.

*The installation of this kit requires a CD-ROM drive and centronics ribbon cable, neither of
which are included.

If you do not have a centronics ribbon cable, please call Merit Customer

Service at 1-800-445-9353 or 215-639-4700 and one will be provided to you. It is recom-
mended that you use a CD-ROM drive of at least 8X or better that is capable of operating on
an angled surface, as you may not always have a level surface on which to place the drive.

You must configure your CD-ROM drive as the

Master Drive

Memory Installation

Turn off your game and unplug it from

its power source.

Open the CPU section door and locate

the motherboard assembly.

Use Figures 1-4, determine what kind

of motherboard is in your game. If you

have a Telco motherboard, you must

install the memory upgrade kit contain-

ing the two SIMMs. For Mitsubishi, Itox

and Unicorn motherboards, you must

install the memory upgrade kit contain-

ing one DIMM. Make sure that you are

installing the correct kit for the mother-

board that is in your game.

CAUTION:

Before handling the board, or any components on the board, it is important to

remove any static electricity from your body by touching a grounded piece of metal on the
game. Failure to ground yourself before performing an upgrade may result in damage to
your system and may prevent you from performing the upgrade. Avoid walking around with
the memory in your hand after you have removed it from the box. This could cause static to
build up.

If your game uses a Mitsubishi, Itox or

Unicorn board, skip to step 6.

Telco boards only: Remove the exist-

ing SIMMs by pushing both support

clips outward and gently removing the

SIMMs out of the socket clearing both

clips. Remove the 2 X 20-pin IDE 2

connector in order to properly install

the new SIMMs (see Figure 1). Install

the two new SIMMs in a 45-degree

angle, making sure all the contacts are

aligned, then roll each SIMM into a ver-

tical position. When they’re locked into

place, secure them with the support

clips. See Figure 1 for location. Skip to

step 12.

PM0466-02 MEGATOUCH MAXX JADE™ EDITION 2

Mitsubishi, Itox and Unicorn boards

only: Remove the I/O board from the

assembly by

removing the two kepnuts

securing the I/O board (see Figures 2A,

3A, and 4A). GENTLY lift the I/O board

from the standoffs and GENTLY pull it

out from the riser card. If you have a

Unicorn motherboard, make sure not to

lose the two spacers located under the

I/O board.

Using Figures 2-4, locate the DIMM strip

in the socket labeled “MM1” on

Mitsubishi and and Itox boards and

“DIMM1” on Unicorn boards.

Simultaneously press down on the two

white tabs on either side of the strip to

release the strip from the socket.

Remove the DIMM strip from the board

and place it in an anti-static bag for

storage.

10. Line up the notches on the replace-

ment DIMM strip with the notches on

the socket labeled MM1 or DIMM1 (the

same socket where the original DIMM

strip was located) and gently and

evenly insert the strip into the socket.

Making sure that the notches are lined

up will ensure that the strip is facing

the correct way.

11. Carefully replace the I/O board by gen-

tly pushing it back into the riser card

and securing it to the standoffs with

the 2 kepnuts. If you have a Unicorm

board, make sure if you replace the

spacers before replacing the board on

the standoffs.

12. Close and lock the CPU section door.

13. Plug in the game and turn on the power

to ensure the memory is installed cor-

rectly. If the game is operating as nor-

mal, the memory was correctly installed.

Continue with “Software Installation”.

FIGURE 1 - TELCO MOTHERBOARD

WITH I/O AND RISER REMOVED FOR MOTHERBOARD IDENTIFICATION

POWER
CONNECTOR
LOCATION

UNUSED DIMM
SOCKET

PROCESSOR
LOCATION

SIMM 1

SIMM 2

IDE 2

TELCO MOTHERBOARD

Software Installation

Connecting a CD-ROM Drive

Turn off power to the game.

Unlock and open the CPU section door

to gain access to the PC tray.

MAXX Countertop

: Unlock the lid from

the game, tilt back and remove from the

game.

Upright

: Unlock the monitor bezel.

In MAXX Classic, MAXX Select, MAXX

Elite, Blue MAXX, Slim MAXX and EZ

MAXX games

: Unlock and open the

rear door of the game.

Connect the 2 x 20-pin IDE connector

(see Figure 5) to the IDE interface con-

nector on the CD-ROM drive. Make sure

the red stripe on the ribbon cable

matches up with pin 1 on the IDE inter-

face connector (see Figure 6).

Connect the four (4) pin power con-

nector on the ribbon cable (see Figure

5) to the DC power input on the CD-

ROM drive (see Figure 6).

Make sure that your CD-ROM drive is

set to MASTER. See Figure 6 for typi-

cal Master/Slave drive location.

Locate the centronics connector.

Countertop

: The centronics connector

is located on top of the electronics box

(see Figure 7).

Upright

: The centronics connector is

located on the PC shelf (see Figure 8).

In MAXX Classic & Blue MAXX games:

The centronics connector is located

above the motherboard assembly (see

Figure 9).

In MAXX Select, MAXX Elite, Slim

MAXX and EZ MAXX games:

The

centronics connector is located on the

PC shelf (see Figure 10).

Connect the centronics connector on

the ribbon cable to the centronics con-

nector on the game.

NOTE

When positioning your CD-ROM

drive, it is important that you find a suitable
place where the CD-ROM drive will not be
in danger of coming in contact with any com-
ponents or wires inside of the game

Program Installation

Performing this upgrade will delete previ-
ous information and files on your hard drive.
If you want to retain any pertinent informa-
tion (ex: Books Screen information), you

will need to document that information be-

fore performing the upgrade.

The update process could take anywhere
from 15 to 20 minutes, depending on the
speed of your CD-ROM drive.

If you are connected to TournaMAXX™,

you must perform an “Update From

Server” before beginning this installa-

tion so that the information is not de-

leted.

Turn on the game and insert the CD

labeled “

Disc 1

” into the CD-ROM drive.

If you don’t get the CD into the drive

before the game starts to boot-up, turn

off the game and turn it back on.

10.

Microtouch touchscreens:

The message: “

By continuing with

this installation program, you in-

dicate that you accept the terms

of Merit’s software license agree-

ment

”

will appear on the screen. The

software license agreement is in the

back of this manual. If you accept the

terms, select “

Yes, I agree

”

ELO touchscreens:

The message: “

By touching the

screen to continue, you indicate

that you accept the terms of

Merit’s software agreement. If

you do not agree to these terms,

PM0466-02 MEGATOUCH MAXX JADE™ EDITION 6

please power down

”

will appear on

the screen. The software license

agreement is in the back of this manual.

If you accept the terms, select “

Yes, I

agree

”

NOTE

If you do not agree to the terms of the

agreement, reboot the game to remove the
CD, then turn the game off and disconnect
the CD-ROM drive. The game will continue
running the current software version

11. When the first CD is finished installing,

the message: “

Please replace the

current CD with CD #2 then close

CD door to continue

” will appear on

the screen. Remove the first CD, in-

sert the CD labeled “

Disc 2

” and close

the CD-ROM door.

12. When the second CD is finished install-

ing, the message: “

Please replace

the current CD with CD #3 then

close CD door to continue

” will ap-

pear on the screen. Remove the sec-

ond CD, insert the CD labeled “

Disc 3

”

and close the CD-ROM door.

13. When the third CD is finished install-

ing, the message:

“Please replace

the current CD with CD #4 then

close CD door to continue”

will

appear on the screen. Remove the

third CD, insert the CD labeled “

Disc

” and close the CD-ROM door.

14. When the installation is complete, the

screen will display the message “

In-

stallation Complete! Please re-

move CD and Reboot.

”

7 MEGATOUCH MAXX JADE™ EDITION PM0466-02

15. Remove the CD and turn off power to

the game. If you are connected to

TournaMAXX™ and have a current

player database CD, install it now. If

you do not have a current player data-

base, the player database will be in-

stalled on the initial call to the

TournaMAXX™ server.

16. Carefully disconnect the ribbon cable

from the centronics connector on the

game. Be sure to grasp the connector

and not the cable itself.

Security Key Installation

17. Locate the security key (the button-

shaped disc with the spoon handle)

on the I/O board of the motherboard

assembly.

Countertop

: See Figure 7.

Upright

: See Figure 8.

In MAXX Classic and Blue MAXX

games:

See Figure 9.

MAXX Select, MAXX Elite, Slim MAXX

and EZ MAXX games

: See Figure 10.

18. Remove the existing security key from

the I/O board and replace it with the

supplied security key.

19. Close and lock the CPU section door of

the game and restore power to the

game. When prompted, perform a

touchscreen calibration.

20. If you are connected to TournaMAXX™,

you must re-enter the dial-in settings

after completing the software upgrade.

After entering the settings, perform an

“Update From Server”. Refer to the

TournaMAXX™ manual for information

on how to perform these functions.

Megatouch™ MAXX Countertop and Upright Games

FIGURE 5 – CENTRONICS/CD-ROM INTER-
FACE RIBBON CABLE

FIGURE 6 – REAR VIEW OF STANDARD CD-
ROM DRIVE

Centronics Ribbon Cable and CD-ROM Drive

PM0466-02 MEGATOUCH MAXX JADE™ EDITION 8

FIGURE 7 - MAXX COUNTERTOP
CENTRONICS UPGRADE CONNECTOR AND
SECURITY KEY LOCATIONS

FIGURE 8 - MAXX UPRIGHT
CENTRONICS UPGRADE CONNECTOR AND
SECURITY KEY LOCATIONS

I/O
BOARD

PC CARD
SLOTS

SECURITY
KEY

CENTRONICS

UPGRADE

CONNECTOR

CENTRONICS
UPGRADE
CONNECTOR

PC CARD
SLOTS

SECURITY
KEY

I/O BOARD

CENTRONICS
UPGRADE
CONNECTOR

PC CARD
SLOTS

SECURITY KEY

METALWORK
BEHIND
MOTHERBOARD

ASSEMBLY

FIGURE 9 - MAXX CLASSIC AND BLUE MAXX
MOTHERBOARD ASSEMBLY - CENTRONICS
UPGRADE CONNECTOR AND SECURITY KEY
LOCATIONS

PC CARD
SLOTS

SECURITY
KEY

CENTRONICS
UPGRADE
CONNECTOR

FIGURE 10 – MAXX SELECT, MAXX ELITE,
SLIM MAXX, AND EZ MAXX CENTRONICS
UPGRADE CONNECTOR AND SECURITY KEY
LOCATIONS

Adhering the Side Decals

21. Turn off and unplug the game.

22. Remove the existing decals (remove

any remaining adhesive residue with

an adhesive remover).

NOTE: Make sure not to get any adhe-
sive removing solvents or solutions on
the touchscreen, as they may damage
the screen.

23. When you are finished removing any

excess adhesive from the game, wipe

the surfaces with alcohol solvent. The

surfaces must be clean and free from

dirt for the new decals to adhere prop-

erly.

9 MEGATOUCH MAXX JADE™ EDITION PM0466-02

24. Partially peel the backing from the top

edge of one of the provided oval de-

cals. Center the decal on the side of

the game and apply the decal. Repeat

the same step for the other side of the

game.

25. Plug in the game and turn on the power.

26. Close and lock the CPU section door of

the game.

Software Installation Troubleshooting Guide

ROBLEM

ORRECTIVE

CTION

•

The game boots
from the hard
drive, not the
CD-ROM drive

•

The jumper setting on the back of the CD-ROM drive must be
set to MASTER (MA).

•

The CD-ROM drive may be defective. Try a different CD-ROM
drive.

•

Make sure that the Centronics cable is connected correctly and
that it is completely pushed down in place.

•

Try another Centronics cable.

•

Try using an IDE ribbon cable connected between the CD-ROM
drive and the motherboard. Unplug the power to the fans to
power the CD-ROM drive. The IDE ribbon cable going to the
motherboard will go to the secondary IDE connector.

•

Game will not
download CD

•

Make sure CD is installed correctly. The logo should be facing
up and the CD should be seated properly in the CD-ROM tray.

•

Make sure the CDs are of the same version of software.

•

Check the CD for scratches or defects. Try a different set of
CDs or a different CD-ROM drive.

•

To verify that the CD-ROM drive is being detected by the
motherboard, install CD 2 and turn on the game. If the game
acknowledges CD 2 with an error message to re-install CD 1
and start the process over, then CD 1 is the problem. If the CD-
ROM drive is not being detected, see “CD-ROM not recognized”
below.

•

CD-ROM NOT
RECOGNIZED

•

An error in the CMOS configuration can create a problem where
the motherboard does not see the CD-ROM drive.

•

To reconfigure the CMOS, turn off the game, set DIP switch 8 to
the closed position and reboot the game. The message, “

Merit

Boot Diagnostics Resetting motherboard CMOS settings to
defaults.

” will appear. When the message, “

Drive checksum

will now be performed..

” appears, turn off the game and reset

DIP switch 8 to the open position.

•

Game reboots
after inserting
the CDs and
turning on
power.

•

If you insert the CDs and power up and then the game reboots,
there may be a problem with the CD-ROM drive. Make sure a
newer CD-ROM drive is being used. Older CD-ROM drives
may have a problem reading the CDs correctly. (MAXX games
will only reboot after the Ruby software is loaded.)

•

The game
prompts you to
install the CD
which is already
in the CD drive.

•

If CD 2 loads about 82-87% of the way and asks for CD 2 to be
installed, this would indicate that CD 2 is defective. Try a
different set of CDs.

•

Hard drive error
when installing
software

•

If the first CD loads about 51% and detects a hard drive error,
the hard drive is defective. To ensure that the hard drive is
defective, first try a different set of CDs and a different CD-ROM
drive. If the reloading attempts failed again at 51%, the hard
drive is defective.

•

“INVALID KEY”
message while
attempting
software
download to the
hard drive

•

If the security key was replaced before the download, the
motherboard did not boot from the CD-ROM drive.

•

Check that the CD-ROM drive is set as master.

•

Check the ribbon cable connections between the CD-ROM drive
and the motherboard.

•

Try another CD-ROM drive or another set of CDs.

PM0466-02 MEGATOUCH MAXX JADE™ EDITION 10

11 MEGATOUCH MAXX JADE™ EDITION PM0466-02

Merit Industries, Inc. Software License Agreement

Merit Industries, Inc. (“Licensor”) is willing to license the enclosed software to you only if
you accept all of the terms in this license agreement.

Ownership of the Software

The enclosed Megatouch™ software program (“Software”) and the accompanying
written materials are owned by Licensor and are protected by United States copyright
laws, patent laws and other intellectual property laws, by laws of other nations, and
by international treaties.

Restrictions on Use and Transfer

If this Software package contains multiple media types (such as CD’s, flash cards,
hard drives, etc), then you may use only the type of media appropriate for your
Machine. You may not use the other media types on another Machine, or transfer, or
assign them to another user except as part of the permanent transfer of the Software
and all written materials (as provided for below in paragraph 4).

You may make one copy of the software for backup purposes only. You may not
copy or make backup copies of any software security key or software security
device under any circumstances.

You may permanently transfer the right to use the Software and accompanying
written materials (including the most recent update and all prior versions) if you retain
no copies and the transferee agrees in writing to be bound by the terms of this
Agreement. Such a transfer of this license to another party immediately terminates
your license. You may not otherwise transfer or assign the right to use the Software,
except as stated in this paragraph.

You may not operate or allow the operation of the Software at locations where the
operation of such Software does not comply with all local, state, and other
governmental body laws and regulations. You agree to not knowingly use or permit
the use of the Software in violation of any U.S. Federal, state, or local laws or
regulations or any foreign law or regulation, including laws regarding intellectual
property rights in or concerning the Software.

You may not modify, adapt, translate, reverse engineer, decompile, disassemble the
Software or create derivative works from the Software or any component thereof;
nor may you remove, modify or hide or otherwise make unreadable or non-viewable
any notice, legend, advice, watermark or other designation contained on the Software,
component thereof, or output therefrom.

You agree that the Software and the authorship, systems, ideas, inventions methods
of operation, documentation and other information contained therein, and all versions,
modifications and adaptations thereto are proprietary intellectual properties of Licensor
and are protected by civil and criminal law, and by copyright, trade secret, trademark
and the patent laws of the United States and other countries.

Limited Warranty

Licensor warrants, solely for your benefit, that the Software will function in material
conformity, with its accompanying documentation for a period outlined in Licensor’s
standard product warranty period after your receipt of the Software.

Licensor’s Obligations Under Warranty

Licensor’s sole obligation under the aforesaid warranty shall be to utilize commercially
reasonable efforts to correct or modify such portion of the Software as to make it
materially conform with the applicable documentation.

PM0466-02 MEGATOUCH MAXX JADE™ EDITION 12

Grant Of License

10. Licensor grants to you a limited, non-exclusive license to distribute and/or use one

copy of the Software on a single Megatouch™ (“Machine”) accompanied by a single
licensor factory authorized security key. Licensor reserves the right to update
versions of the software and the content to the Machine as deemed appropriate by
the Licensor. You are entrusted to maintain and protect your single licensor factory
authorized security key, password, or other identification from being utilized by any
third party, and you agree to be responsible for any use of the Software provided
herein by a third party utilizing your identification. Licensor maintains the right to
immediately terminate your License for reasons related to misuse or other non-
conformity with the rules expressed herein. Licensor also reserves the right to
inspect or audit the Software from time to time in Licensor’s sole discretion. To the
extent that Licensor’s access to the Software requires that Licensor also gain access
to a Machine in which the Software is installed, you agree to promptly provide
Licensor, when requested, with permission and aid in Licensor gaining access to the
Machine.

Disclaimers

11. EXCEPT AS PROVIDED IN THE SECTION ENTITLED “LIMITED WARRANTY”, LICENSOR

MAKES NO OTHER PROMISES, REPRESENTATIONS OR WARRANTIES, WHETHER
EXPRESSED OR IMPLIED, REGARDING OR RELATING TO THE SOFTWARE OR
CONTENT THEREIN OR TO ANY OTHER MATERIAL FURNISHED OR PROVIDED TO
YOU PURSUANT TO THIS AGREEMENT OR OTHERWISE AND LICENSOR SPECIFICALLY
DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE WITH RESPECT TO SAID MATERIALS OR THE USE THEREOF.
TO THE MAXIMUM EXTENT ALLOWABLE BY LAW THE UNIFORM COMMERCIAL CODE
OR OTHER UNIFORM LAWS SHALL NOT APPLY TO THIS AGREEMENT.

Limitation on Liability

12. IN NO EVENT SHALL LICENSOR BE LIABLE UNDER ANY CLAIM, DEMAND OR ACTION

ARISING OUT OF OR RELATING TO THE SOFTWARE, ITS USE, INSTALLATION OR
LICENSOR’S PERFORMANCE OR LACK THEREOF UNDER THIS AGREEMENT FOR
ANY SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES,
WHETHER OR NOT LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
CLAIM, DEMAND OR ACTION. IN ADDITION, WITHOUT LIMITING THE FOREGOING, IN
ALL EVENTS THE REMEDIES AVAILABLE TO YOU SHALL BE LIMITED TO THE AMOUNT
PAID BY YOU TO LICENSOR FOR THE SOFTWARE.

13. IN NO EVENT WILL LICENSOR BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY

LOSS OF PROFITS, LOST SAVINGS, OR OTHER INCIDENTAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF YOUR USE OR INABILITY TO USE THE SOFTWARE.

General

14. The validity and construction of this Agreement and of the rights and obligations herein

shall be determined and governed by the laws of the State of New York. By accepting
the terms of this Agreement, you acknowledge and accept that the courts of New
York, New York shall have exclusive jurisdiction and venue regarding any disputes
arising with regard to this Agreement or arising out of activity or misuse of the
Software.

15. Merit, in its sole discretion, may assign this agreement or any of its rights and

obligations hereunder.

16. If you have any questions concerning this Agreement or wish to contact Licensor for

any reason, please write: Merit Industries, Inc., 2525 State Road, Bensalem, PA
19020, USA.

13 MEGATOUCH MAXX JADE™ EDITION PM0466-02

Contrat de licence de logiciel de Merit Industries, Inc.

Merit Industries, Inc. (ci-après le "Concédant") est disposé à vous accorder la licence
d'utilisation du logiciel ci-inclus, à condition que vous vous engagiez à respecter tous les
termes, clauses et conditions du présent contrat de licence.

Droit de Propriété

Le logiciel Megatouch™ (ci-après le "logiciel") et toute la documentation écrite, restent
la propriété du Concédant et sont protégés par : les lois de droits d’auteur des Etats-
Unis, les lois s’appliquant aux brevets déposés et à la propriété intellectuelle, ainsi que
par celles des autres pays et les traités internationaux.

Restriction d'Utilisation et Transfert

Si le présent logiciel comprend plusieurs types de composants (tels que CD-ROM,
cartes flash, disques durs, etc), vous ne pouvez utilisez que ceux qui conviennent à
votre appareil. Il est strictement interdit de les utiliser sur un autre appareil, les transférer
-ou les céder à un autre utilisateur, sauf en cas de transfert permanent du logiciel et de
toute la documentation écrite (comme indiqué ci-dessous au paragraphe 4).

Il est interdit de copier le logiciel, à l'exception d'une copie de sauvegarde. Il est aussi
interdit de reproduire -ou faire des copies de sauvegarde des programmes de clé de
sécurité ou autres fichiers de sécurité, quelles que soient les circonstances.

Vous pouvez céder en permanence à un tiers -le droit d'utiliser le LOGICIEL et toute la
documentation écrite l'accompagnant, (ainsi que la plus récente mise-à-jour et toutes
autres anciennes versions) seulement si vous n'en gardez aucune copie, et si le
cessionnaire s'engage, par écrit, à respecter les termes, clauses et conditions du
présent Contrat. Cette cession à un tiers met fin à votre licence immédiatement. Autrement,
vous n'avez pas la permission de transférer ou d'accorder à un tiers le droit d'utiliser le
présent logiciel, excepté que tel que décrit dans le présent paragraphe.

Il est interdit d'utiliser le présent logiciel ou de permettre son utilisation dans des emplace-
ments où l'utilisation du présent logiciel n'est pas conforme aux lois et réglementations
locales, nationales ou réglementations d'autres organismes gouvernementaux. Vous
acceptez de ne pas utiliser ou d’autoriser l’utilisation du logiciel d’une manière enfreignant
les lois ou régulations en vigueur aux Etats-Unis et dans les autres pays du monde, y
compris les lois s’appliquant à la propriété intellectuelle de l’ensemble du logiciel.

Il est interdit de modifier, adapter, traduire, démonter, décompiler, désassembler le
logiciel ou créer du matériel dérivé du logiciel ou de tout composant de celui-ci; vous ne
pouvez pas enlever, modifier ou cacher ou rendre illisible ou non-visible toute instruc-
tion, légende, information ou filigrane ou autre désignation qui apparaît dans le logiciel,
composant dudit logiciel ou résultant dudit logiciel.

Vous convenez que le logiciel et les droits d'auteur, les systèmes, les idées, les inventions, les
méthodes d'utilisation, la documentation et autre information incluse, ainsi que toutes les
versions, modifications et adaptations qui s'y rattachent sont les propriétés intellectuelles du
Concédant et sont protégées par le droit civil et pénal et par le droit d’auteur, le secret
commercial, la marque déposée et le brevet aux Etats-Unis et dans les autres pays du monde.

Limite de Garantie

Le Concédant garantit seulement à votre intention, que le logiciel permettra une utilisation conforme,
avec la documentation l'accompagnant, pendant la période de temps indiquée dans la période de
garantie du produit standard du Concédant, à compter de la date de livraison du logiciel.

Responsabilité du Concédant aux termes de la Garantie

La seule obligation du Concédant aux termes de la garantie susmentionnée sera de faire
tous les efforts commercialement raisonnables pour corriger ou modifier la partie du logiciel
pour le rendre matériellement conforme aux spécifications de la documentation.

PM0466-02 MEGATOUCH MAXX JADE™ EDITION 14

Concession de Licence

10. Le Concédant vous accorde le droit d'utiliser une seule copie sur un seul Megatouch™ (ci-

après "Appareil") accompagné d'une seule clé de sécurité autorisée en usine et fournie
par le Concédant. Le Concédant se réserve le droit de mise-à-jour des versions du logiciel
et du contenu de l'Appareil, quand il juge nécessaire de le faire. Vous avez la responsabilité
de protéger la clé de sécurité autorisée en usine fournie par le Concédant. Il vous appartient
également d’empêcher que les mots de passe ou autres codes et la clé de sécurité soient
utilisés par un tiers. Vous acceptez d’assumer la responsabilité dans le cas de l’utilisation
du logiciel par un tiers. Le Concédant se réserve le droit de résilier votre contrat de licence
à tout moment dans l’éventualité d’une utilisation non-conforme aux clauses stipulées. Le
Concédant se réserve également le droit de contrôler le logiciel à tout moment et sans
préavis de sa part. De surcroît, dans l’éventualité où le logiciel n’est accessible qu’à travers
la machine dans laquelle il est installé, le licencié s’engage à donner libre accès au Concédant,
ou ses représentants, à la machine et dans les plus brefs délais.

Exclusion de toute autre garantie

11. EXCEPTE COMME PREVU DANS LA SECTION INTITULEE "LIMITE DE GARANTIE", LE

CONCEDANT N'ASSURE AUCUNE AUTRE GARANTIE DE QUELQUE NATURE ET A
QUELQUE TITRE QUE CE SOIT, EXPLICITE OU IMPLICITE, EN RAPPORT AVEC LE LOGICIEL
ET LES COMPOSANTS QUI L'ACCOMPAGNENT OU, LE CAS ECHEANT, TOUT SUPPORT
OU MATERIEL FOURNI CONFORMEMENT AU PRESENT CONTRAT. EN PARTICULIER, LE
CONCEDANT NE PEUT DONNER AUCUNE GARANTIE, DE QUELQUE NATURE QUE CE
SOIT, POUR LA COMMERCIALISATION DE TOUS LES PRODUITS EN RAPPORT AVEC LE
LOGICIEL OU AVEC L'UTILISATION DE CELUI-CI. DANS LA MESURE OU CELA EST
PERMIS PAR LA LOI, LE CODE UNIFORME COMMERCIAL OU AUTRE LOI UNIFORME NE
S'APPLIQUE PAS AU PRESENT CONTRAT.

Limite de Responsabilité

12. LE CONCEDANT NE SERA EN AUCUN CAS RESPONSABLE DE TOUTE RECLAMATION,

DEMANDE OU ACTION RESULTANT DE OU EN RAPPORT AVEC LE LOGICIEL, SON
UTILISATION OU SON INSTALLATION, OU LA PERFORMANCE OU MANQUE DE PERFOR-
MANCE DU CONCEDANT EN VERTU DU PRESENT CONTRAT POUR TOUS DOMMAGES
D'UNE NATURE QUI N'EST PAS PRESUMEE PAR LA LOI ET QUI DOIVENT ETRE
EXPRESSEMENT PROUVES, DOMMAGE INDIRECTS, DOMMAGES-INTERETS POUR PREJU-
DICE MORAL, QUE LE CONCEDANT AIT ETE AVISE OU NON DE LA POSSIBILITE D'UNE
TELLE RECLAMATION, DEMANDE OU ACTION. DE PLUS, SANS LIMITER CE QUI PRE-
CEDE, LES DEDOMMAGEMENTS A VOTRE DISPOSITION SERONT LIMITES AU MONTANT
QUE VOUS AUREZ PAYE AU CONCEDANT POUR LE LOGICIEL.

13. LE CONCEDANT NE SERA EN AUCUN CAS RESPONSABLE DES DOMMAGES, Y COMPRIS

TOUTE PERTE DE PROFIT, PERTES D'ECONOMIE OU TOUS AUTRES DOMMAGES INDIRECTS
OU DOMMAGES-INTERETS ACCESSOIRES DECOULANT DE L'UTILISATION OU DE
L'IMPOSSIBILITE D'UTILISATION DU LOGICIEL.

Dispositions Générales

14. La validité et la construction du présent Contrat et les droits et obligations ci-inclus

seront déterminés et régis par les lois de l’état de New York aux États-Unis. En accep-
tant les dispositions du présent contrat, vous acceptez également que tous litiges ou
revendications relatives seront réglés par voie d’arbitrage par un tribunal de l’état de
New York, aux Etats-Unis.

15. Merit Industries se réserve le droit de transférer le présent contrat à un tiers ainsi que

ses droits et obligations ci-après.

16. Pour toutes questions concernant le présent Contrat -ou si vous désirez contacter le

Concédant pour une raison quelconque, veuillez écrire à: Merit Industries, Inc., 2525
State Road, Bensalem, PA 19020, Etats-Unis.

15 MEGATOUCH MAXX JADE™ EDITION PM0466-02

Merit Industries, Inc. Softwarelizenzabkommen

Merit Industries, Inc. („Lizenzgeber") ist nur dann bereit Ihnen eine Lizenz für die beiliegende
Software zu erteilen, wenn Sie alle Bestimmungen dieses Lizenzabkommens akzeptieren.

Eigentumsvorbehalt der Software

Das beiliegende Megatouch™ Softwareprogramm („Software") und die schriftlichen
Unterlagen sind Eigentum des Lizenzgebers und sind durch die Gesetze, Patentrechte und
andere Gesetze geistigen Eigentumsrechts der Vereinigten Staaten und anderer Länder und
durch internationale Verträge urheberrechtlich geschützt.

Beschränkungen im Gebrauch und Transfer

Sollte diese Softwarelieferung mehrere Medien enthalten (z.B. CD, Karten, Festplatten
usw.), dürfen Sie nur die für Ihre Maschine angebrachte Medienart verwenden. Die anderen
Medienarten dürfen nicht auf anderen Maschinen verwendet werden oder an Dritte
übergeben werden, abgesehen von einem endgültigen Transfer der Software und aller
schriftlichen Unterlagen (wie im untenstehenden Paragraphen 4 beschrieben).

Sie dürfen nur eine Sicherungskopie der Software herstellen. Unter keinen Umständen
dürfen Sie einen Softwaresicherungsschlüssel oder Sicherungsmaßnahmen kopieren oder
davon Sicherungskopien herstellen.

Sie dürfen das Nutzungsrecht für die Software und die schriftlichen Unterlagen (einschließlich
der aktuellen Version und aller vorhergehenden Versionen) an Dritte übertragen, wenn Sie
keine Kopie behalten und wenn der Empfänger die Bestimmungen dieses Abkommens in
schriftlicher Form akzeptiert. Bei einem solchen Transfer der Lizenz an Dritte erlischt Ihre
Lizenz umgehend. Abgesehen von den Bestimmungen dieses Paragraphen sind alle anderen
Transfers oder Übertragungen der Nutzungsrechte für diese Software unerlaubt.

Sie dürfen die Software nicht benutzen oder eine Nutzung gestatten, wenn eine solche
Nutzung der Software irgendwelche Gesetze und Verordnungen der kommunalen oder
staatlichen Behörden verletzen würde. Sie verpflichten sich die Software nicht wissentlich
so zu benutzen oder benutzen zu lassen, dass sie damit gegen staatliche, Bundes- oder
Lokalgesetze oder Bestimmungen der USA oder gegen ausländische Gesetze oder
Bestimmungen, einschliesslich aller Gesetze bezüglich geistigen Eigentumrechts der Soft-
ware, verstossen.

Es ist Ihnen nicht gestattet, die Software abzuändern, zu verändern, zu übersetzen,
rückumzuwandeln, zu dekompilieren oder zu zerlegen, oder aus der Software oder eines
Teils davon andere Werke abzuleiten. Sie dürfen auch aus der Software, einem Bestandteil
der Software oder aus den Datenausgaben der Software keine Hinweise, Bemerkungen,
Ratschläge, Wasserzeichen oder andere Markierungen entfernen, verändern, verbergen
oder auf andere Art unlesbar machen.

Sie akzeptieren, dass die Software und die Urheberschaft, die Systeme, die Ideen,
Erfindungen, die Arbeitsweisen, die Dokumentation und alle anderen darin enthaltenen
Informationen und alle Versionen, Veränderungen, und Bearbeitungen davon das geistige
Eigentum des Lizenzgebers sind, und dass sie durch Straf- und Zivilgesetzgebung und
durch die Copyright-, Geschäftsgeheimnis-, Warenzeichen- und die Patentgesetze der
Vereinigten Staaten und anderer Länder geschützt sind.

Beschränkte Garantie

Der Lizenzgeber garantiert zu Ihren Gunsten, dass die Software für die angegebene
normale Garantiezeit des Lizenzgebers nach Ihrer Annahme der Software in erheblicher
Übereinstimmung mit der beiliegenden Dokumentation laufen wird.

Verpflichtung des Lizenzgebers im Rahmen der Garantie

Die ausschließliche Pflicht des Lizenzgebers im Rahmen der vorstehenden Garantie besteht
darin, alle geschäftlich vertretbaren Schritte zu unternehmen, um Teile der Software zu
berichtigen oder abzuändern, bis sie mit der beiliegenden Dokumentation erheblich
übereinstimmen.

PM0466-02 MEGATOUCH MAXX JADE™ EDITION 16

Übertragung der Lizenz

10. Der Lizenzgeber gewährt Ihnen eine beschränkte, nicht-ausschliessbare Lizenz zur

Vertreibung und/oder Benutzung einer Kopie der Software auf einem einzelnen Megatouch™
(„Gerät") mit einem einzelnen werksmäßig gestatteten Sicherungsschlüssel. Der Lizenzgeber
behält sich das Recht vor, nach eigenem Ermessen die Software und den Inhalt der Maschine
zu verbessern. Sie sind dafür verantwortlich ihren individuellen, vom Lizenzgeber
werksmäßig gestatteten Sicherheitsschlüssel, ihr Passwort oder anderweitigen
Identifikationsmechanismus instandzuhalten und abzusichern gegen die Nutzung durch
eine dritte Partei, und sie akzeptieren die Verantwortung für jegliche Nutzung der besagten
Software durch eine dritte Partei mithilfe ihresIdentifikationsmechanismus . Der Lizenzgeber
behält sich das Recht vor, ihre Lizenz umgehend zu kündigen aus Gründen des Missbrauchs
oder bei Nichtbefolgung der Bestimmungen in diesem Vertrag. Der Lizenzgeber behält sich
ebenfalls das Recht vor, die Software von Zeit zu Zeit nach eigenem Ermessen zu inspizieren
oder zu überprüfen. Im Falle, dass der Lizenzgeber Zugang zu dem Gerät wünscht, in dem
besagte Software installiert ist, erklären Sie sich bereit, dass sie dem Lizenzgeber, wenn
nötig, Erlaubnis und Hilfe beim Zugang zum Gerät verschaffen.

Beschränkungen

11.

ABGESEHEN VON DEN BESTIMMUNGEN DES PARAGRAPHEN „BESCHRÄNKTE GARANTIE"
GIBT DER LIZENZGEBER KEINE SONSTIGEN VERSPRECHEN, VERPFLICHTUNGEN ODER
GARANTIEN, OB AUSDRÜCKLICH ODER STILLSCHWEIGEND, FÜR DIE SOFTWARE ODER
IHRE BESTANDTEILE ODER FÜR ALLE ANDEREN MATERIALIEN, DIE IHNEN IM RAHMEN
DIESES ABKOMMENS ZUR VERFÜGUNG GESTELLT ODER ÜBERLASSEN WERDEN, UND
DER LIZENZGEBER LEHNT AUSDRÜCKLICH ALLE ANSPRÜCHE AUF MARKTFÄHIGKEIT
UND EIGNUNG DER BESAGTEN MATERIALIEN FÜR DEN GEWÖHNLICHEN GEBRAUCH AB.
SOWEIT GESETZESMÄSSIG ZUGELASSEN, SOLLEN DIE HANDELSRECHTLICHE
GESETZGEBUNG AUS DEM UNIFORM COMMERCIAL CODE ODER ANDERE GESETZE AUF
DIESES ABKOMMEN NICHT ANWENDBAR SEIN.

Haftungsbeschränkung

12. DER LIZENZGEBER HAT KEINERLEI HAFTUNG BEI EINEM ANSPRUCH, EINER FORDERUNG

ODER EINER KLAGE, DIE AUF NUTZUNG DER SOFTWARE, DEREN INSTALLIERUNG, DER
LEISTUNG DES LIZENZGEBERS ODER DESSEN VERSAGEN IM RAHMEN DIESES
ABKOMMENS FÜR JEGLICHE FOLGE-, INDIREKTE, SONDER- ODER NEBENSCHÄDEN
BERUHEN, SELBST WENN DER LIZENZGEBER AUF DIE MÖGLICHKEIT EINES SOLCHEN
ANSPRUCHES, EINER FORDERUNG ODER EINER KLAGE HINGEWIESEN WURDE. WEITERHIN
UND OHNE BESCHRÄNKUNG DES LETZTEN SATZES, DÜRFEN IN ALLEN FÄLLEN DIE IHNEN
ZUR VERFÜGUNG STEHENDEN ABHILFEN DIE VON IHNEN FÜR DIE SOFTWARE AN DEN
LIZENZGEBER GEZAHLTE SUMME NICHT ÜBERSCHREITEN.

13. DER LIZENZGEBER HAT IN KEINEM FALL EINE HAFTUNG IHNEN GEGENÜBER FÜR SCHÄDEN,

EINSCHLIESSLICH ETWAIGER GEWINNVERLUSTE, NICHT REALISIERTER EINSPARUNGEN
ODER ANDERER NEBEN- ODER FOLGESCHÄDEN, DIE AUS IHRER VERWENDUNG ODER
GEBRAUCHSUNFÄHIGKEIT DER SOFTWARE ENTSTEHEN.

Allgemein

14. Die Rechtsgültigkeit und Provisionen dieses Abkommens und der darin enthaltenen Rechte

und Pflichten werden durch die Gesetze des Staates von New York bestimmt. Sollten sie
diese Vereinbarungen annehmen, dann akzeptieren Sie, dass der ausschliessliche
Erfüllungsort und Gerichtsstand bei den Gerichten von New York im Staat New York liegen
hinsichtlich aller Streitigkeiten, die diesen Vertrag betreffen, oder die durch Leistung oder
Missbrauch der besagten Software entstehen.

15. Merit kann nach eigenem Ermessen dieses Abkommen oder jedes der darin enthaltenen

Rechte und Pflichten an Dritte abtreten.

16. Bei Rückfragen über dieses Abkommen oder wenn Sie den Lizenzgeber aus einem anderen

Grund kontaktieren wollen, bitte schreiben an: Merit Industries, Inc., 2525 State Road, Bensalem,
PA 19020, USA.

NOTES:

__________________________________________________________________

_______________________________________________________________

________________________________________________________________

___________________________________________________________________

_______________________________________________________________

________________________________________________________________

__________________________________________________________________

_________________________________________________________________

______________________________________________________________

________________________________________________________________

___________________________________________________________________

__________________________________________________________________

_________________________________________________________________

_____________________________________________________________________